Helpful tips:
Use 30 Gauge Wire
15 Watt Soldering Iron
Use rosin core solder, 60/40 works great
Always use fresh solder for every solder point
Use a wet sponge to take off old solder
Strip only 1/8 to 1/4 inch of wire
Add solder to ends of wire for better contact
Keep wires away from holes and controller buttons
If you want dual trigger rapid fire for Halo 3, then you must add a 5.5 inch wire to pin 6. If you don't play Halo 3, then this will not be needed.
Here are the pictures for making the left trigger Rapid fire for Halo 3 in Mode 1
Im going to test this right away, my dad did the chip mod -rapid fire mod- with the little breadboard and it didint worked on the CG board controller i have the black one and, it's CG cuz it doesnt have the blocking (something like that) resistor in the middle... this is a new method, for me so i'll try it, thanks for posting this too =) hope it works....
ReplyDeletei did it and didnt worked for me... or, is the chip (im about 100% sure is the chip) the chip im using is not even a PIC one, though a 555 Timer X-) and it is the NE555 Timer, should i buy specificaly the PIC 12F683 chip? i have been searcihng in Radio Shack but they don't sell it. on ebay they're selling it but i dont have Credit C. though neither an account with em, ill ask my sis if she can buy me one, thru ebay, she can... LOL... bye bye,,,,hmmmmm i forgot, i have been looking around cuz i have heard that this PIC 12F683 chips can be programmed, is that true? is that much work to programm the chip? how to do it if true? did the chip you used is programmed? is you can answer those questions ill be very grateful thanks in advance... bye
ReplyDelete